TraceForge

A magnitude compensation tool for transfer function measurements through RF systems or other non-transparent measurement paths

Mic calibration
Drop a file
 
+
RF / path response
Drop a file
 
V3.02by DoDo7

Magnitude

dB, 10 Hz – 20 kHz
Mic calibrationRF / path responseCompensated output
Load a mic calibration curve and an RF / path response to start.
Drag the files onto the two boxes above, or use Flat 0 dB and Demo to try TraceForge.
Frequency HzMic dBPath dB usedOutput dB

Use EQ Mode?

EQ Mode writes an inverted, EQ-style compensation curve.

Do not use it for Smaart microphone correction curves: Smaart subtracts correction curves internally.

Use EQ Mode only if your target software applies the curve directly as an EQ or correction filter.

TraceForge license

Please read and accept the license to use TraceForge.

TRACEFORGE SOFTWARE LICENSE
Proprietary Freeware / Donationware License

Copyright (c) 2026 Edoardo Montagnoli.
All rights reserved.

This software, including but not limited to its source code, compiled or minified files,
HTML, CSS, JavaScript, graphics, user interface, documentation, names, branding, and any
related assets, is the exclusive property of Edoardo Montagnoli, unless otherwise stated.

1. Permission to Use

Permission is granted to access and use this software free of charge for personal,
evaluation, testing, demonstration, and non-commercial use only.

This software is distributed as freeware/donationware. A donation is optional and does not
grant ownership of the software, source code, intellectual property, branding, or any
additional rights beyond the permission to use the software under this license.

Donation link:
https://paypal.me/edoardomontagnoli

2. Access and Use Only

This software is licensed for access and use only through the official version provided by
the copyright holder.

You are not granted permission to download, save, copy, mirror, host, redistribute,
publish, modify, deobfuscate, reverse engineer, extract, reuse, or republish the software,
except for temporary technical copies automatically created by the browser as strictly
necessary to access and run the software.

Any offline copy, local copy, mirror, reposted version, modified version, extracted source
code, derived source code, or redistributed copy is prohibited without prior written
permission from the copyright holder.

3. Restrictions

Without prior written permission from the copyright holder, you may not:

- copy, redistribute, sell, rent, sublicense, publish, upload, host, mirror, or otherwise
  make this software or any modified version of it available to third parties;
- modify, adapt, translate, reverse engineer, deobfuscate, decompile, disassemble, inspect
  for the purpose of cloning, or attempt to derive the original source code or internal
  structure of the software;
- remove, alter, hide, or obscure any copyright notice, license notice, donation notice,
  author attribution, branding, or proprietary marking;
- use the software, in whole or in part, as the basis for another product, public project,
  commercial service, derivative work, or competing tool;
- claim ownership, authorship, or affiliation with this software or its author.

4. Feedback and Testing

Users who receive this software for testing or feedback may report issues, suggestions,
and comments to the author. Providing feedback does not grant the user any ownership,
license, or claim over the software or future versions of it.

5. Acceptance of Terms

By accessing, opening, running, or using this software, you acknowledge that you have read,
understood, and accepted the terms of this license.

If you do not agree with these terms, you must not use the software and must delete any
copy in your possession or control.

6. No Warranty

This software is provided "as is", without warranty of any kind, express or implied,
including but not limited to warranties of merchantability, fitness for a particular
purpose, non-infringement, availability, accuracy, or reliability.

The author is not responsible for any damage, data loss, malfunction, interruption,
security issue, financial loss, or any other consequence arising from the use or inability
to use this software.

7. Limitation of Liability

To the maximum extent permitted by applicable law, the author shall not be liable for any
direct, indirect, incidental, special, consequential, exemplary, or punitive damages arising
from the use, distribution, modification, or inability to use this software.

8. Termination

Any violation of this license automatically terminates the permission to use the software.
Upon termination, you must immediately stop using the software and delete all copies in
your possession or control.

9. Permissions

Any request for redistribution, modification, commercial use, inclusion in another project,
or any use not expressly permitted by this license must be requested in writing from the
copyright holder.

10. Entire Agreement

This license represents the entire agreement between the user and the copyright holder
regarding the use of this software. If any part of this license is found to be invalid or
unenforceable, the remaining parts shall remain in effect.

End of license.

TraceForge V3.02

A magnitude compensation tool for transfer function measurements through RF systems or other non-transparent measurement paths. By DoDo7. Copyright (c) 2026 Edoardo Montagnoli. All rights reserved.

TraceForge combines the calibration curve of your measurement microphone with the magnitude response of a wireless (RF) system or any other non-transparent measurement path. The result is a new calibration curve: load it as the mic correction curve in your measurement software, and measurements through the RF path line up with measurements through a cable.

How to use it

  1. Load the mic calibration file in the Mic calibration box (drag it onto the box or press Load), or press Flat 0 dB to use a flat curve.
  2. Measure the RF system against a cable or reference path, export the transfer function as ASCII and load it in the RF / path response box. Press Demo to try TraceForge without a measurement; ↻ makes a new demo curve.
  3. Type the mic, RF / path and custom names. The curve title and the file name are built from them.
  4. The compensation curve is calculated as soon as both curves are loaded, and follows every change. Check the graph, then press Download .txt.

Export modes

Options

Files

TraceForge is not affiliated with, endorsed by, or sponsored by Rational Acoustics or Smaart.